What kind of welded wire mesh is a qualified product

2020-01-09

Anping has many manufacturers that produce Welded Wire Mesh. Some are not a factory at all. Only one worker has one or two machines in it. Their production techniques are generally learned on a temporary basis. After seeing others weaving welded Wire Mesh, they buy one by themselves. The machine weaves welded wire mesh. They have not been professionally trained at all, but they do not know that there are many technical problems, the control of the mesh, and the detection of the wire diameter. Because there is no training, different problems will be encountered in different periods, resulting in the production of unqualified products, then these products are thrown away is unlikely, still circulating in the market, the use of such welding grid will not meet the requirements A garbage project was born.

Here we introduce what kind of welded wire mesh is a qualified welded wire mesh. When we produce welded wire mesh, we have to determine the specifications and wire diameter. We take a 1-inch welded wire mesh as an example, because the welded wire mesh is a very fine thing, welded wire mesh. The diameter can be accurate to 0.01 mm, so there is inevitable error in the wire diameter, but the range of error can not be too large. The general product of 0.02 mm is a qualified welded wire mesh.

In the mesh area is also allowed to have errors, but the error of the mesh can not be too large, generally up and down floating about 0.03 mm is qualified.

Next: Acceptance welding wire mesh product precautions