Welding wire mesh manufacturing process

Stainless steel Welded Wire Mesh is made of stainless steel wire such as 201, 202, 304, 304, 316, 316l, etc. It is made by fine automatic mechanical technology. The mesh surface is flat, the structure is firm and the whole is strong, even if it is partially cut or Part of the encounter with pressure does not cause a loose scene. Stainless steel welded mesh is one of the Stainless Steel Wire Mesh products.

Stainless steel welded Wire Mesh is difficult to cut. Stainless steel is a hard substance with good plasticity and high toughness. However, in the processing time, the cutting is not easy to break and easy to stick, which leads to the cutting and extrusion of stainless steel, which causes the tool to wear moderately (this is due to the wear of the tool, so that the knife face is pitted., causing tiny peeling and gaps; plus the hardness of stainless steel is very high, so choose the right thing according to the material of the stainless steel wire to stop cutting. Use the sander to stop the burr.

Stainless steel welded wire mesh is a mechanical welding method with precise welding and high speed. In the welding process, the welding mesh should pay attention to the welding heat. If it is too large, the wire diameter of the welded wire mesh will be broken, which will affect the performance characteristics of the construction.

1. Stop the polished stainless steel and make a safety protection method when welding.

2. Stop grinding the welded stainless steel products again, making the surface generous and elegant.

3. Finally, stop polishing and polishing the stainless steel products.